Filter
Top Products
Safety Instructions
1-2_________________________________________ R5976743 BARCO MAGIC II INTERFACE 24022004
FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)
This equipment has been tested and found to comply with the limits of a class B digital device,
pursuant to Part 15 of the FCC Rules and EN55022.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : The use of shielded cables is required to comply within the limits of Part 15
of FCC rules and EN55022.
µ All the safety and operating instructions should be read before using this unit.
µ The safety and operating instructions manual should be retained for future reference.
µ All warnings on the equipment and in the documentation manuals should be adhered to.
µ All instructions for operating and use of this equipment must be followed precisely.
On safety
1. This product should be operated from an AC power source.
This interface may be connected to an IT-power system.
POWER REQUIREMENTS
Power requirements for electrical equipment differ from area to area. This instrument adjusts itself for
any input voltage between 85VAC and 245VAC automatically.
2. This product is equipped with a 3-wire grounding plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the purpose of the grounding-type plug.
WARNING FOR THE CUSTOMER: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the
supplied 3 conductor AC power cable. (If the supplied power cable is not the correct one, consult
your dealer.)
If the Power cord of the Interface is equipped with a CEE 7 PLUG,
A. Mains lead (Power cord) with CEE 7 plug :
The wires of the mains lead are colored in accordance with the
following code.
Green & Yellow : Earth (safety earth)
Blue : Neutral
Brown : Line (live)