Filter
Top Products
Descriptions & Connections
R5976743 BARCO M
AGIC II INTERFACE 24022004 _________________________________________ 2-1
APPLICATION GLOBAL
Purpose of this interface is to take RGB signals from a source and to display them on a large screen
projector, while through RGB HV O/P.
Active loop-trough is used for a monitor output.
RGB signals from the computer are automatically terminated to 75 Ohm, while sync signals, which are
TTL signals are terminated with a 22K pull-up resistor.
SPECIFICATIONS MAGIK II INTERFACE:
Measured bandwidth : >300MHz @ -3dB.
Rise and fall time better than 1.42 ns
Gain fixed to 1. (Output = Input)
Input : R,G,B, :0.7 Vpp (no sync) or 1Vpp With sync @ 75 Ohm
Sync : TTL / Analog selected through a switch
Output signals :
Loop trough output on DD15 connector:
R, G, B: 0.7 Vpp (no sync) or 1Vpp @ 75 Ohm
Horizontal Sync: TTL
Vertical Sync: TTL
Composite Sync: TTL
Output to projector on 5 BNC connectors:
R,G,B: 0.7 Vpp (no sync) or 1Vpp @ 75 Ohm
Horizontal Sync: 1.54Vtt
Vertical Sync: 1.54Vtt
Composite Sync: 1.54Vtt
Power supply: Auto ranging Power Supply 87-240V AC 50/60Hz
DESCRIPTIONS & CONNECTIONS
2