Filter
Top Products
2. Basic Commands
The FileData should be the s ame as the data read using the “file, r ea d” command.
2.31.2 File, read
Description
This command reads an image file from the projector (for backup purposes, ...).
The string used to represent the filename is of the C-string type.
Command
Command [0]
\xbf
Send Data
strFilename = string of the C-string type representing the filename.
Returned Data
strFilename = string of the C-st
ring type representing the filename.
FileData = binary data contained in the file.
2.31.3 File List, read
Description
This command reads a list of image files from the projector.
Wildcards can be used to specify the filenames.
Command
Command [0]
\xc0
Send Data
strFilemask1
...
strFilemaskN
Returned Data
strFilename1 = string of the C – string type representing the 1
st
filename.
...
strFilenameN = string of the C – string type representing the N
th
filename.
2.31.4 Active files list, read
Description
This command reads a list of the active image files from the projector.
Command
Command [0]
\xc5
Returned Data
strFilename1 = string of the C – string type representing the active file in the Data window 1.
strFilename2 = string of the C – string type representing the active file in the Video window 1.
strFilename3 = string of the C – string type representing the active file in the Data window 2.
strFilename4 = string of the C – string type representing the active file in the Video window 2.
68
R5976884 RLM SERIES 04/04/2006