Filter
Top Products
DS-RPC OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
66
enter the new password correctly, the DS-
RPC returns to the main menu again, but
you will not get an “Error” message.
Disabling a Password To disable a password, enter <cr> at the
“Enter New Password” prompt. Enter
<cr> again at the “Re-enter New
Password” prompt. Changing the new
password to a carriage return disables
password protection.
Change Outlet Name Select #2, “Change Outlet Name,” and press
<cr>. The DS-RPC sends the following
menu:
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . OUTLET 4
Enter Request:
Enter the number of the outlet you want to
change. If you want to change the name of
Outlet 4, type the number 4 at the “Enter
Request” prompt, followed by <cr>. The DS-
RPC responds:
Enter:
Enter a new receptacle name (maximum
field length, 10 characters), followed by
<cr>. If you want to change the name of
Receptacle 4 from Outlet 4 to Router 1, type
Router 1 from the “Enter” prompt, followed
by <cr>. The DS-RPC responds with the
outlet name menu displaying the name
change to Outlet 4: