Filter
Top Products
64
Manual Documentation Number: EIR608-xSFP_0708m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
State Activity
After setting up the LACP aggregator, port state activity can be configured.
Mark the port and click
Apply
. The port state activity will change to
Active
or
Passive
depending on its previous state.
Active: The port automatically sends LACP protocol packets.
Passive: The port responds only if it receives LACP protocol packets
from the opposite device.
Note 1. A link having either two active LACP ports or one active port can
perform dynamic LACP trunk.
2. A link, which has two passive LACP ports, will not perform dynamic
LACP trunk because both ports are waiting for an LACP protocol
packet from the opposite device.
Port Trunk – State Activity interface