Filter
Top Products
66
Manual Documentation Number: EIR608-xSFP_0708m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Rate Limiting
Set up each port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type: Select the frame type to filter. There are
four options: All, Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast and Broadcast only.
Egress Limit: The egress rate limit is ALL.
Rate Limiting interface
All the ports support port ingress and egress rate control. For example,
assume port 1 is 10Mbps, users can set its effective egress rate to
1Mbps, and ingress rate is 500Kbps. The switch performs the ingress
rate limiting using a packet counter to meet the specified rate
¾ Ingress: Enter the port effective ingress rate(The default value is
‘0’)
¾ Egress: Enter the port effective egress rate(The default value is
‘0’)
Click
Apply