Filter
Top Products
30
Enhanced Wireless USB Adapter
SECTIONSTable of Contents 1 2 3 4 65
TROUBLESHOOTING
Problem:
The name of your wireless network appears in “Available Networks”.
Solution:
If the correct network name is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly:
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you must enter
the network key. Click “Connect”. For more information regarding
security, see the page entitled: “Connecting to a Secure Wi-Fi
Network” on page 22 of this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand corner of
your screen should turn green, indicating a successful connection
to the network.
If you are still unable to access the Internet after connecting to the
wireless network, please contact Belkin Technical Support.
Problem:
The name of your wireless network DOES NOT appear in the list of
“Available Networks”.
Solution:
If the correct network name is not listed, check the SSID settings to
see if they match. The SSID is case-sensitive and the spelling on each
computer must be exactly the same in order for the Adapter to connect
to the wireless router (or access point).
Note: To check the SSID settings or look for an available network,
double-click the Signal Indicator icon to bring up the “Wireless
Networks” screen. Click “Add” if you do not see the network you
are trying to connect to and type in the SSID. For more information
about setting up an SSID, please reference your router manufacturer’s
user manual.
If issues persist even at close range, please contact Belkin
Technical Support.