Belkin DLA-HD2KU Projector User Manual


 
1-10 (No.PA019)
2.7 SERVICE MENU
The service menu contains items not ordinarily needed by the us-
er. Use these as necessary during service.
2.7.1 Enter
(1) No menu shown.
(2) Press the [] button.
(3) Within press the [] button.
(4) Within press the [] button.
(5) Within press the [] button.
(6) Within press the [ENTER] button to display the service
menu.
NOTE:
When the Service Menu Screen is not displayed, go back to
the beginning. It is recommended that you press the buttons a
little earlier and steadily.
2.7.2 Release
Press the [MENU] button to exit the menu indication.
2.7.3 Basic operation
Use the following buttons to operate the service menu.
(1) Choose the SETTING MENU with the [/] button.
(2) When the [] button is pressed after choosing the SET-
TING MENU, the cursor will shift to the SETTING / AD-
JUSTMENT ITEMS of each SETTING MENU.
(3) When the cursor is shifted, choose the SETTING / AD-
JUSTMENT ITEMS with the [/] button.
(4) Using the [/] button, change the setup values and ad-
justment values, respectively.
(5) When the [EXIT] button is pressed, the cursor will return to
the SETTING MENU.
(6) When the [MENU] button is pressed, the SERVICE MENU
will go out of the screen.
NOTE:
The SERVICE MENU will go out of the screen automatically
after 10 seconds if you do not press the [MENU] button.
࠰ࡈ
࠰ࡈ
࠻ࡃ
࠻ࡃ
࡯ࠫ
࡯ࠫ
࡚ࡦ
Option SCREEN
Software version SCREEN
PRG : 014
OSD : 011
DLA-HD2K
options
options
software version
software version
software version
software version
Back Color Black
Auto shut off Off
Color temp.
Blue
On
USER1 D65 USER2
Factory reset
ENTER
Adjust pattern
ENTER
options
options
RED
GREEN
BLUE
0
0
0
SERVICE MENU
SETTING NENU SETTING / ADJUSTMENT ITEM