129
129
12
13
14
15
16
17
Troubleshooting
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
section
1. This product is not found even after searching
by the Belkin All-In-One Print Manager.
• Check if the power adapter and the network cable
are connected to the Print Server properly.
• Check if the LAN or WLAN LED is turned on.
• Check if the IP address of the Print Server is in
the network segment as your computer.
- If you are not sure of the Print Server’s IP-
address setting, check the TCP/IP setting of the
Print Server from the Server Manager.
2. Following are instructions on how to
change the Print Server’s IP address:
• A DHCP server is installed in the network.
If a DHCP server is installed, you can choose
to allow the Print Server to get an IP address
from the DHCP server automatically.
1. Open “Server Manager” and then select “TCP/IP” setting.
2. Select “Auto IP” and click “Save”.
3. Reboot the All-In-One Print Server.