Filter
Top Products
Configuring Additional Computers Using Belkin NetSetup
18
4. In the "Computer Name" field, type a name for the computer such
as "Computer 2". Remember, the name must be different from that
of the other computers on the network.
5. The "Workgroup" field should be filled in with the workgroup name
you entered on the previous computer. Do not change this setting.
6. Type in a description such as "Windows 98". This can be anything
you want and does not have to be different from or the same as the
description of any other computer on the network. You may also
leave this field blank.
3. Windows will now prompt you to insert the newly created client
setup disk into the PC’s floppy drive. Insert the disk you labeled
"Belkin Networking" into the floppy drive and click OK. The
following screen will appear: