Filter
Top Products
Alternate Setup Method
30
Step 4
Configuring your Router for Connection to your
Internet Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to
connect to your Internet Service Provider (ISP). The Router is capable
of connecting to virtually any ISP’s system provided you have correctly
configured the Router’s settings for your ISP’s connection type. Your
ISP connection settings are provided to you by your ISP. To configure
the Router with the settings that your ISP gave you, click “Connection
Type”
(A)
on the left side of the screen. Select the connection type you
use. If your ISP gave you DNS settings, clicking “DNS”
(B)
allows you
to enter DNS address entries for ISPs that require specific settings.
Clicking “MAC Address”
(C)
will let you clone your computer’s MAC
address or type in a specific WAN MAC address, if required by your
ISP. When you have finished making settings, the “Internet Status”
indicator will read “Connection OK” if your Router is set up properly.
(A)
(B)
(C)