Filter
Top Products
Troubleshooting
15
Synchronizing the Receiver and Wireless Desktop 280
1. Press the connect button on top of the receiver, and then
press the button on the bottom of the keyboard. It should
connect within 10 seconds.
2. Press the connect button on the top of the receiver, and
then press the button on the bottom of the mouse. Within 10
seconds, it should connect.
3. If the keyboard did not connect, please repeat step 1.
4. If the mouse did not connect, please repeat step 2.
Switching Channels
If interference occurs while using the keyboard and/or mouse,
switch channels by following the steps below:
Keyboard: Press the button on the bottom of the keyboard
to switch channels
Mouse: Press the button on the bottom of the mouse to
switch channels
If the keyboard and/or mouse is/are not working after installation:
Be sure the receiver’s cables are plugged into either the
computer’s PS/2 ports or a USB port. If you are connecting it via
PS/2, make sure that both plugs are being used (purple keyboard
connector and the USB connection with the green PS/2 adapter).
If you are connecting via USB, make sure that you only connect
the USB connector.
P74834-A_F8E860-BNDL_man.indd 15 19/5/05 11:28:40 am