Belkin P73851-B Network Card User Manual


 
2. Select “Create with Passphrase” (b).
[passphrase.tif]
3. Enter a Passphrase and click “Apply”. Clicking “Apply” will generate four keys if you choose 64-bit or 1 key if
you choose 128-bit.
4. You can now select which 64-bit key you want to use from the ”Use WEP Key” (c) drop-down menu. Leave this
set to “1” unless you have a specific reason to use another key. Click “Apply” for the changes to be saved.
Encryption is now enabled. Each wireless equipped computer (client) that needs to communicate on the wireless
network must be set to the same encryption settings (rate, passphrase and key).
Setting 64-Bit or 128-bit Manually using a Hexidecimal key (Advanced)
1. Select 64-bit or 128-bit from the drop-down menu.
2. Select “Create Keys Manually” then enter one to four 10 digit hexadecimal keys for 64-bit encryption or one 26
digit hexadecimal key for 128-bit encryption. Hexadecimal values consist of number 0-9 and letter a-f.
3. If using 64-bit Encryption, select the key you want to use.
4. Click “Apply”
Encryption is now enabled. Each wireless equipped computer (client) that needs to communicate on the wireless network
must be set to the same encryption settings (rate, passphrase and key).
c
b