Filter
Top Products
Placing the Belkin Wireless USB Network Adapter
A six-foot USB cable is provided with the Adapter to allow you to place it as high as possible. The best location is on top of
your computer’s monitor. Placing the Adapter on your desktop is acceptable, however, avoid placing the adapter near
metal objects such as a computer case or speakers. Any object that is metal has the ability to block the radio signals from
the Adapter.
Installing and setting up the Adapter
Installing your Adapter is done in three easy steps.
1. Install the software FIRST. If you connect your adapter to your PC before you install the software, it will not work
until you install the software.
2. Connect the Adapter to your MAC.
3. Configure the Adapter and MAC TCPIP Settings
Step 1: Software and Driver Installation (Mac OS 9.x)
1. Insert the CD into your CD-ROM drive.
2. Double-click on the file “Belkin_F5D6050Mac9v100b4.sit”.
3. Open the folder created on your desktop and double-click on the Installer.
4. The Installer will start. Select Easy Install. Click Install.
5. The installer will start. Click Continue to automatically quit all other running applications. The installer will
continue.
NOTE: INSTALL THE SOFTWARE FIRST BEFORE YOU CONNECT THE ADAPTER TO YOUR COMPUTER