6
WARNING: Follow these directions closely and in the proper order. Failure
to do so may result in mouse and/or keyboard errors.
Before attempting to connecting anything to the OmniCube
™
or the
computers, make sure everything is powered off. Plugging and unplugging
cables may cause irreversible damage to your computers and the OmniCube
™
.
Belkin Components will not be held responsible for damage caused.
Hardware Installation
Back of OmniCube
™
1. Find a convenient place to
put your OmniCube
™
. Its
small size makes it ideal for
the desktop. Take note of
the length of your cable kits
so that your computers,
OmniCube
™
, keyboard,
mouse and monitor are
distanced properly.
2. Connect the monitor to the
OmniCube
™
. Using the
attached cable which
is included with your
monitor, connect it to the
HDDB15 female port on
the back of the OmniCube
™
labeled MONITOR.
P73050/F1D092AM/man.qxd 4/28/00 1:43 PM Page 6