Filter
Top Products
12
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 5 6 7 8 9 104
CONNECTING AND CONFIGURING YOUR ROUTER
1.2 Replacing an
Existing Modem or
Modem Router
Follow these steps if you
currently have a modem
or a modem router that
you will be replacing with
your new Router.
1. Unpack your new
Router from the box
and place it next
to your computer.
Raise the Router’s
antennas.
2. Locate the cable
that connects your
old modem to your
computer. Unplug
that cable from your
old modem and plug
it into any yellow
port labeled “to
Wired Computers”
on the back of your
new Router.
3. Locate the cable
that connects your
old modem to the
ADSL wall jack.
Unplug it from your
old modem and then
connect it to the
gray port labeled “to
ADSL” on the back
of your Router.
4. Plug your Router’s
power supply into
the black port
labeled “Power”
on the back of
your Router.
5. Wait 20 seconds
for the Router to
start up. Look at
the display on the
front of the Router.
Make sure the
“Power” and “LAN
(1-4)” LEDs are lit up
in green.
2
1
3
4
3
LA
N
ADSL