Filter
Top Products
44
G Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9 105
MANUALLY CONFIGURING YOUR ROUTER
Schedule Rule
You may filter Internet access for local clients based on rules. Each
access control rule may be activated at a scheduled time. Define the
schedule on the “Schedule Rule”, and apply the rule on the “Access
Control” page.
Follow these steps to add a schedule:
1. Click “Add Schedule Rule”.
2. You will see the following screen.
3. To configure the schedule rule, specify the name, comment, start
time, and end time that you want to filter on your network.
4. Click “OK” and then “Apply Changes” to save your settings.
5. To complete this configuration, you will need to create or modify
an access rule in the “Client IP filters” section. This activates the
schedule for use in the “Access Control” page.
URL Blocking
To configure the URL-blocking feature, specify the websites (www.
somesite.com) and or keywords you want to filter on your network. Click
“Apply Changes” to activate the change. To complete this configuration,
you will need to create or modify an access rule in the “Client IP filters”
section. To modify an existing rule, click the “Edit” option next to the
rule you want to modify. To create a new rule, click on the “Add PC”
option. From the “Access Control > Add PC” section, check the option
for “WWW with URL Blocking” in the “Client PC Service” table to filter
out the websites and keywords specified.