Filter
Top Products
9 How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the monitor and place it on a stable
surface.
2. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on
the same PC. The only case in which both cables
can be used is if they are connected to two different
PCs with appropriate video systems.
Connect one end of the DVI-D cable to the monitor
DVI-D socket and the other end to the DVI-D port
on your computer. (optional)
The DVI-D format is used for direct digital
connection between source video and digital LCD
monitors or projectors. The digital video signals
produce a superior quality picture than analog
video signals.
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor D-Sub
socket. Connect the other plug of the D-Sub cable
(at the end with the ferrite filter) to the computer
video D-Sub socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
Either
Or
3. Connect the USB hub cable.
Connect the USB cable between the USB socket on
the rear of the monitor and a USB port on your
computer.