Filter
Top Products
Operation48
Function Description
Projector
Position
The projector can be installed on a ceiling or behind a screen,
or with one or more mirrors. See "Choosing a location" on
page 14 for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Auto Power Off
Allows the projector to turn off automatically if no input signal
is detected after a set period of time. See "Setting Auto Power
Off" on page 52 for details.
Blank Timer
Sets the image blank time when the Blank feature is activated,
once elapsed the image will return to the screen. See "Hiding
the image" on page 38 for details.
Panel Key Lock
Disables or enables all panel key functions except Power on
the projector and keys on the remote control. See "Locking
control keys" on page 40 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Splash Screen
Allows you to select which logo screen will display during
projector start-up. The following options are available: BenQ
logo, Black screen or Blue screen.
Auto Blank
See "Hiding the image" on page 38 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On
enables the function and projector cooling time will be
shortened from a normal 90-second duration to approximately
30 seconds.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in
a high altitude environment" on page 40 for details.
4. SYSTEM SETUP: Basic menu
I
I
5. SYSTEM SETUP:
Advanced menu