Filter
Top Products
Operation 51
FUNCTION DESCRIPTION
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 35 for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 35
for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 36 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See"Adjusting Contrast" on page 36 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 36 for details.
This function is only available when a Video or S-Video signal is
selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 36 for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 36 for details.
This function is only available when a Video or S-Video signal is
selected.
2. PICTURE menu