BenQ W5000 Projector User Manual


 
35
Using the projector
English
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menu Sub-menu Options
Picture -- Basic
Picture Mode
Cinema/Dynamic/Standard/User 1/User 2/User
3
Load Settings From
Brightness 0–100
Contrast 0–100
Color 0–100
Tint -20–+20
Sharpness 0–8
Reset Picture Settings
Rename User Mode
Picture --
Advanced
Black Level 0 IRE/7.5 IRE
Clarity Control
Noise Reduction 0/1/2/3
Detail Enhancement 0-10
Luma Transmission 0/1/2
Chroma Transmission 0/1/2
Color Temperature
Lamp Native/Warm/Normal/Cool/User 1/User
2/User 3
Color Temperature
User_ Fine Tuning
Red Gain 0–100
Green Gain 0–100
Blue Gain 0–100
Red Offset 0–100
Green Offset 0–100
Blue Offset 0–100
Gamma Selection 2.2/2.4/2.5/2.6/2.8
Brilliant Color On/Off
Color Management
Primary Color Red/Yellow/Green/Cyan/Blue/Magenta
Range 0–100
Saturation 0–100
Dynamic Black On/Off
IRIS 0–19
Lens Shift
Display
Aspect Ratio Anamorphic/4:3/Wide/Real/Letter Box
Keystone 2D Keystone
Position
Overscan Adjustment 0/1/2/3
PIP
PIP On/Off
Main Source
Video/S-Video/Component 1/Component 2/
HDMI 1/HDMI 2/RGB HD
Second Source
Active Window Main/Second
Position Top-Right/Top-Left/Bottom-Right/Bottom-Left
Size Large/Small
PC & Component YPbPr
Tuning
H.Size -15–+15
Phase -15–+15
Auto
W20000-en.book Page 35 Monday, October 22, 2007 3:35 PM