Best Data Products DSL502E_EU Network Router User Manual


 
Best Data DSL542 ADSL Ethernet Router User’s Guide
33
You can click in the Action(s) column to view additional details about a NAT translation
session, as shown in Figure .
Figure 24. NAT Translation – Details Page
In addition to the information displayed in the NAT Translations table, this table displays the
following for the selected current translation sessions:
Field Description
Translated
InAddress
The public IP address to which the private IP
address was translated.
In Address
The private IP address that was translated.
Out Address
The IP address of the outside destination (web,
ftp site, etc.)
In/Out Packets
The number of incoming and outgoing IP
packets that have been translated in this
translation session.
In Ports
The actual port number corresponding to the
LAN computer.
Out Ports
The port number associated with the destination
address.
Translated In Ports
The port number to which the LAN computer’s
actual port number was translated.
Adding NAT Rules
This section explains how to create rules for the various NAT flavors.
Note
You cannot edit existing NAT rules. To change a rule setup,
delete it and add a new rule with the modified settings.
The napt rule: Translating between private and public IP addresses
Follow these instructions to create a rule for translating the private IP addresses on your LAN to
your public IP address. This type of rule uses the NAT flavor napt, which was used in your
default configuration. The napt flavor translates private source IP addresses to a single public IP
address. The napt rule also translates the source port numbers to port numbers that are defined
on the NAT Global Configuration page (see page 29).