Filter
Top Products
Chapter 3 Configuration
47
3.4.3.7.8 MISC Configuration
HTTP server access: Default at Restricted.
HTTP server port: Default at 80.
FTP server: Default at Enabled.
TFTP server: Default at Disabled.
DMZ: Regarding the DMZ Host, it is a local computer exposed to the Internet. Therefore, an incoming
packet will be checked by NAT algorithms in the ADSL Router, then passed to the DMZ host when the
packet is not sent by hacker or not limited by the virtual server list.
DMZ HOST IP: Enter the IP address of the DMZ host.
DHCP Relay: Default at DHCP Server.
DHCP Target IP: Default is 0.0.0.0
IGMP Proxy: Default at Disabled.
PPP Half Bridge: Default at Disabled.
PPP reconnect on WAN access: Default at Disabled. Select Enabled if you want to automatically re-
establish the PPPoE/PPPoA session when disconnected by ISP.
3.4.3.7.9 Diagnostic Test
As soon as you enter the test program, all tests will run automatically to diagnose the connection status of
the device.