Filter
Top Products
Billion BIPAC 7100SV VoIP ADSL Router
38
3.4.3.3.7 Timer
This screen contains settings for timers (all are given in seconds) in system level.
RedialTimer: indicate the time period through which the dial tone is heard once the phone is lifted off the
hook. At the end of this period, if no digits have been pressed, VoIP device will start playing fast-busy
tone.
AlertTimer: indicate the time for which VoIP device will play the ring when an incoming call has arrived
and phone is on-hook. After this time period, the VoIP device will stop the ring automatically and reject
the incoming call.
DisconnectTimer: indicate the time for which the fast-busy tone is played once a call has been
disconnected by remote end. At the end of this time, the Warble tone will be played until the user hangs
up the phone.
RingBackTimer: Indicate the time period for which the VoIP device will wait while the ring back tone is
been played for the final response from the other end point once an outgoing call has been made and the
initial response has been received.
CallProgressTimer: indicate the time period for which VoIP device will wait for initial response from the
other end point once an outgoing call has been made.
CallWaitingTimer: indicate the time period for which the call-waiting tone will be played when an
incoming call arrives in the connected state.
CallFwdNoAnsTimer: indicate the time period for which the call will be forwarded when no answered by
anyone. This timer is applicable when “call forward on no answer” is enabled.