Filter
Top Products
removing the need for the user to control advanced configuration of their device.
Both the user’s Operating System and the relevant application must support UPnP in
addition to the router. Windows XP and Windows Me natively support UPnP (when the
component is installed), and Windows 98 users may install the Internet Connection Sharing
client from Windows XP in order to support UPnP. Windows 2000 does not support UPnP.
Disable: Check to disable the router’s UPnP functionality.
Enable: Check to enable the router’s UPnP functionality.
UPnP Port: The default setting is 2800. It is highly recommended that you use this port
value. If the value conflicts with other ports already in use you may wish to change the port.
SNMP Access Control
Simple Network Management Protocol—software on a PC within the LAN is required to use
this function.
SNMP V1 and V2:
Read Community: Specify a name to be identified as the Read Community, and an IP
address. This community string is checked against the string entered in the configuration
file. Once the string name is matched, you can obtain this IP address and are able to view
the data.
Write Community: Specify a name to be identified as the Write Community, and an IP
address. This community string is checked against the string entered in the configuration file.
Once a string name is matched, users from this IP address are able to view and modify data.
Trap Community: Specify a name and an IP address. This community string is checked
against the string entered in the configuration file. Once a string name is matched, users
from this IP address are sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication, and define access rights from the identified
IP address. Once authentication has succeeded, users from this IP address are able to view
and modify data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community
string paradigm for "security" but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
87