Filter
Top Products
Page 14
724-746-5500 | blackbox.com
LGB624A
Chapter 3: Software Description
• MAC Address: Displays the unique hardware address assigned by manufacturer
(default).
• S/W Version: Displays the switch’s firmware version.
• H/W Version: Displays the switch’s hardware version.
• DHCP Enabled: Click the box to enable DHCP.
• Fallback IP address: Manually assign the IP address that the network is using.
The default IP is 192.168.2.1.
• Fallback Subnet Mask: Assign the subnet mask to the IP address.
• Fallback Gateway: Assign the network gateway for industrial switch. The default
gateway is 0.0.0.0.
• Management VLAN: ID of a configured VLAN (1–4096) through which you can
manage the switch. By default, all ports on the switch are members of VLAN 1.
However, you change the management VLAN, the management station must
be attached to a port belonging to this VLAN.
• Name: Type in a unique name to identify the switch.
• Password: Type in the new password (the default value is “admin”).
• SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP version
1 and 2c management clients.
• SNMP Trap Destination: IP address of the trap manager to receive notification
messages from this switch. Traps indicating status changes are issued by the
switch to specified trap managers. You must specify trap managers so that key
events are reported by this switch to your management station.
• SNMP Read Community: A community string that acts like a password and
permits access to the SNMP database on this switch. Authorized management
stations are only able to retrieve MIB objects.
• SNMP Trap Community: Community string sent with the notification operation.