Filter
Top Products
Page 41
724-746-5500 | blackbox.com
LGB624A
Chapter 4: Maintenance
4. Maintenance
4.1 Warm Restart
Press the “Yes” button to restart the switch. The reset will be complete when the
power lights stop blinking.
Figure 4-1. Warm Reset screen.
4.2 Factory Default
This function forces the switch back to the original factory settings. To reset the
switch, select “Reset to Factory Defaults” from the drop-down list and click
“Apply.” The LAN IP Address, Subnet Mask and Gateway IP Address will be reset
to their factory default settings.
Figure 4-2. Factory Default screen.
4.3 Software upload
Select “Upgrade Firmware” from the Tools drop-down list then click on the
“Browse” button to select the firmware file. Click the APPLY button to upgrade
the selected switch firmware file. User can download firmware files for user’s
switch from http://ftp.blackbox.com/lan/switches/FW/most%20current%20fw.