Black Box 24-Port Web Smart Gigabit Ethernet Switch Switch User Manual


 
Page 36
724-746-5500 | blackbox.com
LGB624A
Chapter 3: Software Description
P2P Port: Shows if this port is functioning as a Point-to-Point connection to
exactly one other bridge. The switch can automatically determine if the interface
is attached to a point-to-point link or to shared media. If shared media is
detected, the switch will assume that it is connected to two or more the switch
will assume that it is connected to two or more bridges.
Protocol: Shows the spanning tree protocol functioning on this port, either STP
or STP (that is, STP-compatible mode).
3.3.5 IGMP Status
IGMP Status shows the IGMP Snooping statistics for the entire switch.
• VLAN ID: VLAN ID number.
• Querier: Show whether Querying is enabled.
• Queries transmitted: Show the number of transmitted Query packets.
• Queries received: Show the number of received Query packets.
• v1 Reports: Show the number of received v1 Report packets.
• v2 Reports: Show the number of received v2 Report packets.
• v3 Reports: Show the number of received v2 Report packets.
• v3 Leave: Show the number of v3 leave packets received.
Figure 3-30. IGMP status screen.
3.3.6 VeriPHY
3.3.6.1 VeriPHY Cable Diagnostics
Users can perform cable diagnostics for all ports or selected ports to diagnose any
cable faults (short, open, etc..) and feedback a distance to the fault.
Cable Diagnostics: Cable diagnostics is performed on a per-port basis. Select the
port number from the drop-down list.