Filter
Top Products
APPENDIX B: RACK MOUNT OPTIONS
44
Appendix B: Rack Mount Options
Extender units can be mounted in a 19” rack using the mounting kit::RMK19U-R2.
Each kit consists of two angled brackets.
To mount a unit:
1. Remove the two screws from one side of the unit.
2. Match up the lower pair of holes on a bracket with the vacant screw holes on the side of
the unit.
3. Using the original screws, fasten the mounting brackets to the side of the unit.
4. Repeat this procedure on the other side of the unit.
5. Fasten the assembly to the rack unit.
Figure 14 RMK19U-R2 Mounting Kit