Black Box ACU5116A Network Hardware User Manual


 
 


23

 


®
Safety information
• For use in dry, oil free indoor environments only.
• Do not use to link between buildings.
• Ensure that the twisted pair interconnect cable is installed in compliance
with all applicable wiring regulations.
• Do not connect the CATx link interface (RJ45 style connector) to any other
equipment, particularly network or telecommunications equipment.
• Warning – the power adapter contains live parts.
• No user serviceable parts are contained within the power adapter - do not
dismantle.
• Plug the power adapter into a socket outlet close to the Wizard unit that it is
powering.
• Replace the power adapter with a manufacturer approved type only.
• Do not use the power adapter if the power adapter case becomes damaged,
cracked or broken or if you suspect that it is not operating properly.
• If you use a power extension cord with the extenders, make sure the total
ampere rating of the devices plugged into the extension cord do not exceed
the cord’s ampere rating. Also, make sure that the total ampere rating of all
the devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
• Do not attempt to service the Wizard modules yourself.
• The Wizard modules and power supplies can get warm in operation – do
not situate them in an enclosed space without any ventilation.
• The Wizard modules do not provide ground isolation and should not be
used for any applications that require ground isolation or galvanic isolation.
Other products in the Wizard range
The following related Wizard items are available:
• Wizard Extender ACU5013A
Allows one system to be controlled from two locations or permits a second
video channel to be sent to a remote location. Used in conjunction with two
receiver/remote modules ACU5111A.
• Rack mount chassis ACU5000A
This 19” chassis allows multiple Wizard modules to be neatly arranged
within a standard cabinet. Securing plates and screws are supplied separately
for each Wizard module for use with the rack mount chassis.
• Power distribution module PS5000
Provides power for up to four Wizard modules to reduce mains power
socket requirements.
• Rack mount securing plates
• single slot blanking plate ACU5003
• quad slot blanking plate ACU5004