Black Box ASTCRCR Time Clock User Manual


 
Chapter 4: Operation
724-746-5500 | blackbox.com 4-21
NOTE: Care must be exercised when setting up Time Sync schedules because a
maximum of 8 separate Time Sync schedules can be set up. Each of these
8 schedules could be enabled and have up to a maximum of 12 scheduled
time syncs per day. The flash memory in the clock is capable of retaining
up to 5 years worth of data created as per OATS Rule 7430 which requires
2 Time Syncs per day. Therefore, if multiple schedules are created and
enabled, the length of time that data could be retained might be severely
reduced. This should not discourage setting up multiple schedules. Perhaps
all of them do not have to be active. At any time, you can simply activate
or deactivate a schedule by clicking on the enable box. However, you
should be aware that the more time syncs per day that the clock is
scheduled to perform, the more data that is going to be stored in the clock,
thus filling up flash memory faster.
3. Enter the schedule Name (maximum length is 20 characters).
NOTE: The acceptable characters for a Schedule name are ‘a-z’ upper and
lowercase, ‘0-9’, (-) dash, (_) underscore, (*) asterisk, and a space. For
example, “Before Trading” is a valid format.
4. Select Time Sync for the Type of schedule template from the drop down menu.
The choices for type are; Time Sync, Report, and Backup.
NOTE: A maximum of eight (8) time sync schedules, two (2) Report schedules,
and two (2) Backup schedules for a total of 12 separate schedules that can
be user created. Report and Backup schedules do not consume any of the
on-board clock flash memory.
5. Select the schedule start date from the drop down menus.
6. Select the schedule start time from the drop down menus.
7. Select the schedule recurrence. The choices are: Daily, or Weekly.
If Daily is selected, then define Run Every “X” day(s), and check Run Every:
“X” min(s) to enter the number of minutes.
If Weekly is selected, then define Run Every: “X” week(s) and check the days
to sync (check box for each day or check box for All).
The default for days = 1, Minimum = 1, and Maximum = 365.
The default for minutes = 120, Minimum = 120, and
Maximum = 1439
The default for weeks = 1, Minimum = 1, and Maximum = 52.