Filter
Top Products
Compact T1 - Release 6.1 23
Quick Start
Configuration
Set Up a DS1/T1
Use the following commands to set up a DS1. See the set (ds1) command for more
details.
Set Up a DS0/Channel
Use the following commands to set up a DS0. See the set (ds0) command for details.
Command Description
set {slot:port} up Activate the port.
set {slot:port} id {"id-string"} Set the identification string.
set {slot:port} lbo {1-9} Set the line buildout value for the DS1.
set {slot:port} linecode {ami|b8zs} Set the linecode for the DS1.
set {slot:port} framing {d4|esf
|tr8afdl|tr8anofdl|tr8b}
Set the framing option for the DS1.
set {slot:port} loopdetect
{on|off}
Set the detection/reaction to CSU
loopcodes.
Command Description
set {slot:port:channel} up Activate the channel.
set {slot:port:channel} signal
{ls|gs|emw|emdw|emicpd|dpt}
Set the signaling option for the channel.
set {slot:port:channel} type
{data|voice}
Set the channel type.