Filter
Top Products
24 Compact T1 - Release 6.1
Quick Start
Configuration
Set Up an Analog Port
Use the following commands to set up an analog port.
Command Description
set {slot:port} up Activate the port. See set (ds1) command for
details.
set {slot:port} signal {dpt|gs|
gsrb|gsw|gswrb|ls|lscpd|lsrb}
Set the signaling option for the port. See the
set (fxs) or set (fxo) command for details.
set {slot:port} rxgain {n} Set the receive gain/loss in dB. See the set
(fxs) or set (fxo) command for details.
set {slot:port} txgain {n} Set the transmit gain/loss in dB. See the set
(fxs) or set (fxo) command for details.