Filter
Top Products
10/100Base-TX Hardened PoL/PoE Ethernet Extender
User’s
Manual
10
One-Channel Hardened Ethernet Extender
Ports
The Hardened Ethernet Extender provides TX ports and one Ethernet
Extender port.
For the TX ports, it uses RJ-45 connectors and auto senses the speed of
10/100 Mbps.
For the Ethernet Extender port, it uses RJ-11 and Terminal Block
connectors and auto senses the speed of Link (below
20)/20/40/60/80/100Mbps.
Ethernet Extender Mode Settings
Ethernet Extender mode settings are simple using a DIP (Dual Inline
Package) switch on the top panel of the Hardened Ethernet Extender.
DIP Switch
DIP
Switch
Down Up
Transmitter
PoL Disable Power over Link Enable Power over Link
Type
Std (Standard)
Standard line speed
Better noise immunity
Per (Performance)
Better line speed
Poor noise immunity
Receiver
Mode
Loc (Local)
Set Receiver to Local Mode
Rmt (Remote)
Set Receiver to Remote Mode
Type
Std (Standard)
Standard line speed
Better noise immunity
Per (Performance)
Better line speed
Poor noise immunity