Filter
Top Products
10/100Base-TX Hardened PoL/PoE Ethernet Extender
User’s
Manual
2
∞ Connect one end of the one pair copper wire to the RJ-11 phone jack or 2-pin
Terminal Block interface of the Transmitter and connect the other end to RJ-11
phone jack or 2-pin Terminal Block interface of the Receiver.
∞ Data can be transmitted between the Transmitter and the Receiver via copper wire.
Physical Description
The Port Status LEDs and Power Inputs
Transmitter Receiver
∞ DC Terminal Block Power Inputs: 2.5A @ 48VDC (Peak current 3.26A).
Two pairs of
power inputs can be used to power up this Ethernet Extender. The redundant power
supplies function is supported. You only need to have one power input connected to
run the Ethernet Extender.
∞ DC JACK Power input: 2.5A @ 48VDC (Peak current 3.26A).