Filter
Top Products
10/100Base-TX Hardened PoL/PoE Ethernet Extender
User’s Manual 5
Ethernet Extender Connection
The RJ-11 and Terminal Block port pinouts:
Pin 3: Tip, Pin 4: Ring.
Use a telephone line to connect two
RJ-11 or Terminal Block ports between
two Hardened Ethernet Extenders.
Functional Description
∞ Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity
for industrial environment.
∞ Ethernet port: Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:
10/100Mbps, full/half-duplex; Auto MDI/MDIX.
∞ Auto data rate negotiation for the Ethernet extension interface.
∞ Supports six speeds with speed indicator LEDs on the front panel of the
unit, up to 100Mbps @ about 300 meters (984 ft.), down to 1Mbps @
about 2,200 meters (7,218 ft.).
∞ Supports Power over Ethernet applications up to 1,200meters (3,937ft.)
for Max. 5 watts power consumed PoE powered devices.
∞ Power consumption:
- Enable Power over Link (PoL) function: Max. 65 Watts
- Disable Power over Link (PoL) function: Transmitter: Max. 5 W.
Receiver: Max. 35 W with PoE output, Max. 5 W without PoE
output.
∞ Power Supply: Redundant T:46-57V / R:46-57V DC Terminal Block
power inputs and 48 VDC Latched DC JACK interface.
∞ Operating temperature range @ -40 to 75 (-40 to 167). Tested
for functional operation @ -40 to 85 (-40 to 185).
∞ Supports Din-Rail or Panel Mounting installation.