Filter
Top Products
Black Box
®
Heavy Duty Edge Switches Installation and User Guide(07/05)
41
The side-view < here is an example of an installation of the model LH1505P-RACK, 19”
rack-mount tray, holding a few LBHXXX, and LBH100A, each with their power input
plugged into the built-in common AC power supply in the rear area of the tray. (AC PS
units that come with the office models of the Edge Switch’s are not used). Because of the
thicker size, only eight LBHXXX units can fit in one
LH1505P-RACK.
Metal mounting screws in the
bottom-front hold each of the Edge Switches,
securing them in the tray and enabling
separate removal for service. The dual LEDs
permit viewing of Edge Switch status from
any angle.
3.4 DIN-Rail mounting option
The Black Box LBHXXXH and
LBHXXXA(E)-P Edge Switches, designed for use
in “Factory Floor” Industrial Ethernet environments, are available for DIN-Rail mounting
in an enclosure having DIN Rails. A Black Box LBH240A-H is shown alongside the
DIN-Rail- bracket here ->