Filter
Top Products
You can configure the console server to the default (Local) or using an alternate authentication method
(TACACS, RADIUS, or LDAP). Optionally, you can select the order in which local and remote
authentication is used:
Local TACACS /RADIUS/LDAP: Tries local authentication first, falling back to remote if local fails.
TACACS /RADIUS/LDAP Local: Tries remote authentication first, falling back to local if remote
fails.
TACACS /RADIUS/LDAP Down Local: Tries remote authentication first, falling back to local if the
remote authentication returns an error condition (for example, if the remote authentication
server is down or inaccessible).
9.1.1 Local authentication
Select Serial and Network: Authentication and check Local.
Click Apply.
9.1.2 TACACS authentication
Perform the following procedure to configure the TACACS+ authentication method to use whenever the
console server or any of its serial ports or hosts is accessed:
Select Serial and Network: Authentication and check TACAS or LocalTACACS or TACACSLocal
or TACACSDownLocal
Enter the Server Address (IP or host name) of the remote Authentication/Authorization server.
Multiple remote servers may be specified in a comma-separated list. Each server is tried in
succession.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 167