Black Box LES1416A Server User Manual


 
Note You can configure the second Ethernet port as either a gateway port or as an OOB/Failover port
(but not both). Make sure you did not allocate Network 2 as the Failover Interface when you
configured the principal Network connection on the System: IP menu.
The management gateway function is now enabled with default firewall and router rules. By default,
these rules are configured so the Management LAN can only be accessible by SSH port forwarding. This
ensures that the remote and local connections to Managed Devices on the Management LAN are secure.
You can also configure the LAN ports in bridged mode (as described later in this chapter) or you can
configure them from the command line.
3.6.2 Configure the DHCP server
The LES1508A, LES1408A, LES1416A, LES1432A, LES1448A, LES1308A, LES1316A, LES1332A, LES1348A,
LES1208A-R2, LES1216A-R2, LES1232A and LES1248A-R2 console servers also host a DHCP server which
by default is disabled. The DHCP server enables the automatic distribution of IP addresses to hosts on
the Management LAN that are running DHCP clients. To enable the DHCP server:
On the System: IP menu select the Management LAN page and click the Disable label in the
DHCP Server field (or directly go to the System: DHCP Server menu.
Check Enable DHCP Server.
Enter the Gateway address that you want to issue to the DHCP clients. If you leave this field
blank, the console server’s IP address will be used.
Enter the Primary DNS and Secondary DNS address to issue the DHCP clients. If you leave this
field blank, the console server’s IP address is used. So, leave this field blank for automatic DNS
server assignment.
Optionally, enter a Domain Name suffix to issue DHCP clients.
_____________________________________________________________________
724-746-5500 | blackbox.com Page 40