Filter
Top Products
28
256-KBPS LINE DRIVER (V.35, RS-530, OR X.21)
6. Run twisted-pair cable between the local and remote cards. Attach one
pair of wires to the corresponding XMT terminals (“TB1”) on the back of
the local
RackNest
and the corresponding RCV terminals on the remote
RackNest
; attach the other pair of wires to the RCV terminals on the local
RackNest
and the XMT terminals on the remote
RackNest
. (It doesn’t
matter which wire in each pair goes to which terminal in each pair; the
cards autosense parity.) If you’re using a ground wire, attach it to the GND
terminal on one
RackNest
(not both of them!)