Filter
Top Products
25
®
The KVMADMIN utility
Particularly useful for complex Wizard IP Plus configurations and the control of
remote installations, KVMADMIN is a powerful administration tool.
KVMADMIN is based upon the successful VNC viewer and uses the same
security system. Rather than a graphical interface such as the standard viewer,
KVMADMIN uses command line control to provide the following administration
facilities:
• Discover and adjust the Wizard IP Plus configuration, including host systems,
• Save and restore the Wizard IP Plus configuration,
• Set user names and passwords,
• Download the event log,
• Set custom video modes.
The use of KVMADMIN is strictly limited to the ‘admin’ user and for security
purposes it is not possible to retrieve user names or passwords from the Wizard
IP Plus.
To use KVMADMIN you require the IP address and admin password of the
Wizard IP Plus unit. The command line is as follows:
kvmadmin <command> <ip address> [<parameters>]
where <command> is one of the following:
• -setconfig <config-file>
• -getconfig <config-file>
• -setusers <csv-file>
• -getlog <log-file>
• -gethosts <csv-file>
• -sethosts <csv-file>
• -setmodes <csv-file>
For instance, the command line:
kvmadmin -getconfig kvm1.cfg 192.168.2.1
... downloads the current configuration from the Wizard IP Plus unit at the given
address and stores it in the local file kvm1.cfg.
Whereas the command line:
kvmadmin -setusers users.csv 192.168.2.1
... configures the usernames and passwords for the same unit from the local file
users.csv.
For more information about KVMADMIN, please refer to the user notes supplied
with the utility.