Bolens P5S800-VM Personal Computer User Manual


 
1-221-22
1-221-22
1-22
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introductionChapter 1: Product introduction
Chapter 1: Product introduction
1.10 Connectors
1.10.11.10.1
1.10.11.10.1
1.10.1
Rear panel connectorsRear panel connectors
Rear panel connectorsRear panel connectors
Rear panel connectors
1.1.
1.1.
1.
PS/2 mouse port (green).PS/2 mouse port (green).
PS/2 mouse port (green).PS/2 mouse port (green).
PS/2 mouse port (green). This port is for a PS/2 mouse.
2.2.
2.2.
2.
Parallel port.Parallel port.
Parallel port.Parallel port.
Parallel port. This 25-pin port connects a parallel printer, a scanner,
or other devices.
3.3.
3.3.
3.
LAN (RJ-45) port.LAN (RJ-45) port.
LAN (RJ-45) port.LAN (RJ-45) port.
LAN (RJ-45) port. This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub. Refer to the table below
for the LAN port LED indications.
2.2.
2.2.
2.
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS.
P5S800-VM
®
P5S800-VM Keyboard power setting
(Defaul
t)
+5V +5VSB
KBPWR1
2312
1
11 7
2 3
10
4
5
6
9 8