Filter
Top Products
22 en | Configuring the system 1200 and 1400 Series iSCSI Disk Arrays
Doc | V1 | 2010.09 Software Manual Bosch Sicherheitssysteme GmbH
4. Click Browse, browse to the %windir%\System32 folder, and then click Wintarget.exe.
Click Open and then click Next.
5. Click Allow the connection, and then click Next.
6. Select the network locations that should be bound to this rule (the default is Domain,
Private, and Public). Click Next.
7. Under Name, type a descriptive name for the rule. For example, type Microsoft iSCSI
Software Target Service for the program rule for Wintarget.exe. Click Finish.
To add an inbound filter rule for a port:
1. Open Windows Firewall with Advanced Security. In Server Manager, expand
Configuration, expand Windows Firewall with Advanced Security, and then click
Inbound Rules.
2. In the Actions pane, click New Rule.
3. Under What type of rule would you like to create, click Port, and then click Next.
4. Select the protocol for this rule, either TCP or UDP. Under Does this rule apply to all
local ports or specific local ports, click Specific local ports and type in the appropriate
port number.
5. Click Allow the connection, and then click Next.
6. Select the network locations that should be bound to this rule (the default is Domain,
Private, and Public). Click Next.
7. Under Name, type a descriptive name for the rule. For example, type Remote Procedure
Call for the RPC communication on TCP port 135. Click Finish.
To configure Window Firewall settigs from command line with the following sample script:
1. netsh advfirewall firewall add rule name="Microsoft iSCSI Software
Target Service-TCP-3260" dir=in action=allow protocol=TCP
localport=3260netsh advfirewall firewall add rule name="Microsoft iSCSI
Software Target Service-TCP-135" dir=in action=allow protocol=TCP
localport=135
netsh advfirewall firewall add rule name="Microsoft iSCSI Software
Target Service-UDP-138" dir=in action=allow protocol=UDP localport=138
netsh advfirewall firewall add rule name="Microsoft iSCSI Software
Target Service" dir=in action=allow
program="%SystemRoot%\System32\WinTarget.exe" enable=yesnetsh
advfirewall firewall add rule name="Microsoft iSCSI Software Target
Service Status Proxy" dir=in action=allow
program="%SystemRoot%\System32\WTStatusProxy.exe" enable=yes