BOXLIGHT CP-12tA Projector User Manual


 
15
BEFORE OPERATION
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control to moisture, or heat.
Do not drop the Remote Control.
If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Press lid down-
ward and slide it.
Remove the battery
compartment lid.
Slide the batteries
into compartment.
Replace the compartment lid.
Two AA size batteries
For correct polarity (+ and
), be sure battery
terminals are in contact
with pins in compartment.
REMOTE CONTROL BATTERIES INSTALLATION
1
2
3
Operating Range
Point the Remote Control toward
projector (Infrared Remote
Receiver) whenever pressing any
button. Maximum operating
range for Remote Control is about
16.4 (5m) and 60° in front and
rear of the projector.
16.4
(5 m)
60°
16.4
(5 m)
Used to operate P-TIMER
function. (P21)
LOCK
FREEZE
SELECT
D.ZOOM
MUTE
VOLUME
-
MENU
NO SHOW
IMAGE
VOLUME
+
KEYSTONE
LASER
P-TIMER
ZOOM
COMPUTER
VIDEO
FOCUS
AUTO PC
ON-OFF
P-TIMER BUTTON
Used to adjust zoom. (P20)
ZOOM BUTTON
NO SHOW BUTTON
Used to turn the picture
into black image. (P21)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/ mode and
resize image. (P30)
FREEZE BUTTON
Used to freeze the picture.
(P20)
60°
MENU BUTTON
Used to open or close the
On-screen menu. (p17,
18)
COMPUTER BUTTON
Used to select input source
(COMPUTER 1 or
COMPUTER 2).
(P22)
SELECT BUTTON
Used to execute the item
selected, or to expand or
compress image in
DIGITAL ZOOM +/- mode.
(P30)
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust value in ON-
SCREEN MENU. They are
also used to pan image in
DIGITAL ZOOM +/- mode.
(P30)
POINT LEFT/RIGHT
buttons are also used as
VOLUME +/- buttons.
(P21)
VIDEO BUTTON
Used to select input
source (VIDEO). (P31)