Filter
Top Products
8
PREPARATION
● Do not cover the vent slot.
● Keep the rear grill at least 3 feet (1m) away from any
object.
● Keep the bottom clear of any obstruction.
Obstructions may block cooling air.
This projector is equipped with the cooling fans for protection from overheating. Pay attention to the following
to ensure ventilation and avoid a possible risk of fire and malfunction.
VENTILATION
This projector uses nominal input voltages of 100-120 V
AC / 200-240 V AC. The projector automatically selects
the correct input voltage. It is designed to work with
single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if your
are not sure of the type of power supply being in use.
Connect the projector with the peripheral equipment
before turning the projector on. (Refer to pages 10 ~15
for connection.)
Connect the AC power supply cord (supplied) to the projector.
The socket-outlet must be near this equipment and must be
easily accessible.
CAUTION
For safety, unplug the AC Power Cord when the
appliance is not in use.
When this projector is connected to the outlet with
the AC Power Cord, the appliance is in Stand-by
Mode and consumes some electric power.
Projector side (Female)
AC outlet side (Male)
CONNECTING THE AC POWER CORD
AIR INTAKE VENT
(BOTTOM SIDE)
EXHAUST VENT
(REAR SIDE)