Brady 300X-PLUS Printer User Manual


 
56 Brady X-PLUS Series User’s Guide
Selecting Prefix and Delimiter Characters
Prefix and delimiter characters are 2-digit hex values used within the ZPL/ZPL II formats sent to
the printer. The printer uses the last prefix and delimiter characters sent to it, whether from a
ZPL II instruction or from the front panel.
NOTE: DO NOT use the same hex value for the control, format, and delimiter character. The
printer needs to see different characters to function properly.
Press Display Shows Action/Explanation
CONTROL PREFIX
Control Prefix Character Press the LEFT BLACK OVAL key to
move to the next digit position, press the RIGHT BLACK OVAL
key to increase the value of the digit.
Default: 7E (tilde - displayed as a black square)
Range: 00-FF
The printer looks for this 2-digit hex character to indicate the start
of a ZPL/ZPL II control instruction.
FORMAT
PREFIX
Format Prefix Character Press the LEFT BLACK OVAL key to
move to the next digit position, press the RIGHT BLACK OVAL
key to increase the value of the digit.
Default: 5E (caret)
Range: 00-FF
The printer looks for this 2-digit hex character to indicate the start
of a ZPL/ZPL II format instruction.
DELIMITER CHAR
Delimiter Character Press the LEFT BLACK OVAL key to
move to the next digit position, press the RIGHT BLACK OVAL
key to increase the value of the digit.
Default: 2C (comma)
Range: 00-FF
The delimiter character is a 2-digit hex value used as a parameter
place marker in ZPL/ZPL II format instructions. Refer to the ZPL II
Programming Guide Volume I for more information.