Filter
Top Products
39
4.1.5 System Settings
CONFIGURATION FILE Options for storage and recall of printer
configuration files. See Appendix F for
details.
RESTORE AS CURRENT
Provides a list of available configuration
files. Selecting a file from the list causes a
printer reset; afterward, the printer is
configured according to the activated file.
SAVE SETTING AS
Saves the entire effective configuration of
the printer to a file. Unique names with up
to nineteen characters are possible.
DELETE FILE
Provides a list of available configuration
files. Files selected are immediately
removed, freeing the module.
þ Note: A currently activated file cannot
be deleted.
FACTORY SETTING FILE
Provides a list of available configuration
files. The selected file will be restored
whenever a Level 1 reset is performed; see
Section 4.0.6.2.
INTERNAL MODULE
²1024 KB
Sets the number of 1K blocks allocated for
the internal RAM ‘D’ module. Available
memory dependent upon model; see
Appendix C.
DEFAULT MODULE
²D
Sets the default module used to store files
when no other module is specified;
see
Appendix C.
SCALEABLE FONT CACHE
²312 KB
Sets the number of 1K blocks allocated for
the scaleable font engine. Available memory
dependent upon model; see Appendix C.
SINGLE BYTE SYMBOLS Selects the code page used to print single
byte fonts unless otherwise specified in
DPL.
²PC_850 MULTILINGUAL
61 selectable sets are standard; see the
Programmer’s Manual for details.