Brady 6441 Printer User Manual


 
46
System Settings (continued)
SOP EMULATION Enables the <STX>O and <STX>f print
positioning commands to allow backward
compatibility with label formats designed
for other printers. (When changing these
values, the printer will automatically feed
two labels to setup the new print position.)
110 (PRODPLUS)
Emulates the Prodigy Plus
®
printer.
220 (ALLEGRO)
Emulates the Allegro
®
printer.
250 (PRODIGY)
Emulates the Prodigy
printer.
²DISABLED
No emulation, natural start of print position.
BACK AFTER PRINT When the present distance is set with the
cutter, present sensor or GPIO option
enabled, this setting determines the timing
of the label back up.
ENABLED
Commands the printer to immediately back
up the label after the cut operation, the
GPIO start of print signal is received, or the
present sensor is clear. It provides the
advantage of faster throughput.
²DISABLED
The printer will not initiate repositioning
until the next label is ready to print. May
help prevent the curling of the label edge.
MENU LANGUAGE
Selects the language in which the menu
system messages and configuration label
are shown. Only languages that are resident
will be available.
²ENGLISH
English
FRENCH
French
ITALIAN
Italian
GERMAN
German
SPANISH
Spanish
USER DEFINED
User defined, downloaded language(s).