Filter
Top Products
Figure 4-14
12. Once you select manual Settings, change the Transponder to 11726, change the Symbol
Rate to 8000, change the FEC to ¾ and the Polarity should be Horizontal/Left (High) as
shown in Figure 4-15.
Figure 4-15
13. After making the above changes, the Tune button will light up (Figure 4-16). If your settings
are correct, just retype the Transponder so that the Tune button lights up. Left click on the
Tune button. Under the Transponder Information the Network box will change from No
Information to Acquiring….
23