Figure 2-8
9. Remove the CD from the CD Rom drive and restart your computer.
You have successfully installed the drivers and are ready to install the TechniSat modem software.
Proceed to Chapter 3: Installing The Software.
3 Installing the Software
The application used to configure and maintain the TechniSat modem is located on the installation
CD provided with the B2C2 PCI or USB modem. To install it, you’ll need to insert the CD into the CD
Rom drive.
1. Windows XP will automatically start the CD and ask you to select the Setup language. Then
click OK (Figure 3-1).
Figure 3-1
9
2. The Install Shield Wizard will start to load automatically (Figure 3-2).